Exam TopicsThe following information provides general guidelines for the content likely to be included on the Implementing Cisco Unified Wireless Networking Essentials exam. However, other related topics may also appear on any specific delivery of the exam.

Describe WLAN fundamentals
Describe basics of spread spectrum technology (modulation, DSS, OFDM, MIMO, Channels reuse and overlap, Rate-shifting, CSMA/CA)
Describe the impact of various wireless technologies (Bluetooth, WiMAX, ZigBee, cordless phone)
Describe wireless regulatory bodies, standards and certifications (FCC, ETSI, 802.11a/b/g/n, WiFi Alliance)
Describe WLAN RF principles (antenna types, RF gain/loss, EIRP, refraction, reflection, ETC)
Describe networking technologies used in wireless (SSID –> WLAN_ID –> Interface — >VLAN, 802.1q trunking)
Describe wireless topologies (IBSS, BSS, ESS, Point-to-Point, Point-to-Multipoint, basic Mesh, bridging)
Describe 802.11 authentication and encryption methods (Open, Shared, 802.1X, EAP, TKIP, AES)
Describe frame types (associated/unassociated, management, control, data)

Install a basic Cisco wireless LAN
Describe the basics of the Cisco Unified Wireless Network architecture (Split MAC, LWAPP, stand-alone AP versus controller-based AP, specific hardware examples)
Describe the Cisco Mobility Express Wireless architecture (Smart Business Communication System — SBCS, Cisco Config Agent — CCA, 526WLC, 521AP – stand-alone and controller-based)
Describe the modes of controller-based AP deployment (local, monitor, HREAP, sniffer, rogue detector, bridge)
Describe controller-based AP discovery and association (OTAP, DHCP, DNS, Master-Controller, Primary-Secondary-Tertiary, n+1 redundancy)
Describe roaming (Layer 2 and Layer 3, intra-controller and inter-controller, mobility groups)
Configure a WLAN controller and access points WLC: ports, interfaces, WLANs, NTP, CLI and Web UI, CLI wizard, LAG AP: Channel, Power
Configure the basics of a stand-alone access point (no lab) (Express setup, basic security)
Describe RRM

Install Wireless Clients
Describe client OS WLAN configuration (Windows, Apple, and Linux.)
Install Cisco ADU
Describe basic CSSC
Describe CCX versions 1 through 5

Implement basic WLAN Security
Describe the general framework of wireless security and security components (authentication, encryption, MFP, IPS)
Describe and configure authentication methods (Guest, PSK, 802.1X, WPA/WPA2 with EAP- TLS, EAP-FAST, PEAP, LEAP)
Describe and configure encryption methods (WPA/WPA2 with TKIP, AES)
Describe and configure the different sources of authentication (PSK, EAP-local or -external, Radius)
Operate basic WCS
Describe key features of WCS and Navigator (versions and licensing)
Install/upgrade WCS and configure basic administration parameters (ports, O/S version, strong passwords, service vs. application)
Configure controllers and APs (using the Configuration tab not templates)
Configure and use maps in the WCS (add campus, building, floor, maps, position AP)
Use the WCS monitor tab and alarm summary to verify the WLAN operations

Conduct basic WLAN Maintenance and Troubleshooting
Identify basic WLAN troubleshooting methods for controllers, access points, and clients methodologies
Describe basic RF deployment considerations related to site survey design of data or VoWLAN applications, Common RF interference sources such as devices, building material, AP location Basic RF site survey design related to channel reuse, signal strength, cell overlap
Describe the use of WLC show, debug and logging
Describe the use of the WCS client troubleshooting tool
Transfer WLC config and O/S using maintenance tools and commands
Describe and differentiate WLC WLAN management access methods (console port, CLI, telnet, ssh, http, https, wired versus wireless management)

pass4sure ccna wireless Questions and Answers : 116Q&As
Updated: October 10th , 2008
Price: $125.99 $99.99
free down:Pass4sure cisco 640-721
Free Down:Testking ccna 640-721

password:www.ciscoexams.org

Related posts:

1. Testking Cisco ccna 640-822 ICND1
2. Testking Cisco 640-802 CCNA
3. Testking Cisco ccna voice 640-460 IIUC

Retired November 6, 2007
Exam Number: 640-821
Associated Certifications: CCNA
Duration: 75 minutes (45-55 questions)
Available Languages: English
Click Here to Register: Pearson VUE
Exam Policies: Read current policies and requirements
Exam Tutorial: Review type of exam questions

Exam Description Exam Topics Recommended Training Additional Resources
Exam Description
The Introduction to Cisco Networking Technologies exam is one of the two qualifying exams available to candidates pursuing a two-exam option for CCNA. This exam tests content covered in the Introduction to Cisco Networking Technologies (INTRO) course including topics on Network Types, Network Media, Switching Fundamentals, TCP/IP, IP Addressing and Routing, WAN Technologies, Operating and Configuring IOS Devices, and Managing Network Environments. The exam will certify that the successful candidate has important knowledge and skills necessary to describe and identify major network and WAN components, along with their function and purpose.

Exam Topics
The following information provides general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes the guidelines below may change at any time without notice.

Design and Support
Use a subset of Cisco IOS commands to analyze and report network problems
Use embedded layer 3 through layer 7 protocols to establish, test, suspend, or disconnect connectivity to remote devices from the router console
Determine IP addresses

Implementation and Operation
Establish communication between a terminal device and the router IOS, and use IOS for system analysis
Manipulate system image and device configuration files
Perform an initial configuration on a router and save the resultant configuration file
Use commands incorporated within IOS to analyze and report network problems
Assign IP addresses
Describe and install the hardware and software required to be able to communicate via a network
Use embedded data link layer functionality to perform network neighbor discovery and analysis from the router
Use embedded layer 3 through layer 7 protocols to establish, test, suspend or disconnect connectivity to remote devices from the router console

Technology
Demonstrate the mathematical skills required to work seamlessly with integer decimal, binary and hexadecimal numbers and simple binary logic
Define and describe the structure and technologies of computer networks
Describe the hardware and software required to be able to communicate via a network
Describe the physical, electrical and mechanical properties and standards associated with optical, wireless, and copper media used in networks
Describe the topologies and physical issues associated with cabling common LANs
Identify the key characteristics of common wide area networking (WAN) configurations and technologies, and differentiate between these and common LAN technologies
Describe the purpose and fundamental operation of the internetwork operating system (IOS)
Describe the role of a router in a WAN
Identify the major internal and external components of a router, and describe the associated functionality
Identify and describe the stages of the router boot-up sequence
Describe how the configuration register and boot system commands modify the router boot-up sequence
Describe the concepts associated with routing, and the different methods and protocols used to achieve it
Describe how an IP address is associated with a device interface, and the association between physical and employ IP addressing techniques
Employ IP addressing techniques
Compare and contrast collision and broadcast domains, and describe the process of network segmentation
Describe the principles and practice of switching in an Ethernet network
Explain how collisions are detected and handled in an Ethernet system
Explain the fundamental concepts associated with the Ethernet media access technique
Describe how the protocols associated with TCP/IP allow host communication to occur
Describe the operation of the Internet Control Message Protocol (ICMP) and identify the reasons, types and format of associated error and control messages
Describe the principles and practice of packet switching utilizing the Internet Protocol (IP)

Free 640-821 Exams’s PDF Download
Free Testking offers free demo for 640-821 PDF(Introduction to Cisco Networking Technologies). You can check out the interface, question quality and usability of our practice exams . We are the only one site can offer demo for almost all Introduction to Cisco Networking Technologies.

Recommended Training about 640-821 exam PDF
The following courses are the recommended training for 640-821 exam PDF.
640-821 Q & A with Explanations
640-821 Audio Exam
640-821 Study Guide
640-821 Preparation Lab

Testking 640-821 INTRO
Interactive Testing Engine Included!
426 Questions
Updated : 09/18/2008
Price : $76.99 $69.99

Free download?testking 640-821 INTRO
Free download?pass4sure 640-821 INTRO

Related posts:

1. Testking Cisco 640-801 CCNA
2. Testking Cisco 640-811 ICND
3. Testking Cisco ccna 640-822 ICND1

Retired November 6, 2007
Exam Number: 640-811
Associated Certifications: CCNA
Duration: 60 minutes (40-50 questions)
Available Languages: English
Click Here to Register: Pearson VUE
Exam Policies: Read current policies and requirements
Exam Tutorial: Review type of exam questions

Exam Description Exam Topics Recommended Training Additional Resources
Exam Description
The ICND exam is one of the two qualifying exams available to candidates pursuing a two-exam option for the Cisco Certified Network Associate CCNA certification. The ICND (640-811) exam will test materials from the new Interconnecting Cisco Network Devices (ICND) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Cisco networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

Exam Topics
The following information provides general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes the guidelines below may change at any time without notice.

Planning and Designing
Design or modify a simple LAN using Cisco products
Design an IP addressing scheme to support classful, classless, and private addressing to meet design requirements
Select an appropriate routing protocol based on user requirements
Design a simple internetwork using Cisco products
Develop an access list to meet user specifications
Choose WAN protocols to meet design requirements

Implementation and Operations
Perform an initial configuration on a switch
Configure routing protocols given user requirements
Configure IP addresses, subnet masks, and gateway addresses on routers and hosts
Configure a router for additional administrative functionality
Configure a switch with VLANS and inter-switch communication
Implement a LAN
Customize a switch configuration to meet specified network requirements
Implement access lists
Implement simple WAN protocols

Troubleshooting
Utilize the OSI model as a guide for systematic network troubleshooting
Perform LAN and VLAN troubleshooting
Troubleshoot routing protocols
Troubleshoot IP addressing and host configuration
Troubleshoot a device as part of a working network
Troubleshoot an access list
Perform simple WAN troubleshooting

Technology
Describe the Spanning Tree process
Evaluate the characteristics of LAN environments
Evaluate the characteristics of routing protocols
Evaluate rules for packet control
Evaluate key characteristics of HDLC, PPP, Frame Relay, DDR, and ISDN technologies

Free 640-811 Exams’s PDF Download
Free Testking offers free demo for 640-811 PDF(Interconnecting Cisco Networking Devices). You can check out the interface, question quality and usability of our practice exams . We are the only one site can offer demo for almost all Interconnecting Cisco Networking Devices.

Recommended Training about 640-811 exam PDF
The following courses are the recommended training for 640-811 exam PDF.
640-811 Q & A with Explanations
640-811 Audio Exam
640-811 Study Guide
640-811 Preparation Lab

Testking 640-811 ICND
Interactive Testing Engine Included!
508 Questions
Updated : 09/18/2008
Price : $76.99 $69.99

Free download?testking 640-811 ICND
Free download?pass4sure 640-811 ICND

Related posts:

1. Testking Cisco 640-801 CCNA
2. Testking Cisco 640-816 ICND2
3. Testking Cisco ccna 640-822 ICND1

Retired November 6, 2007
Exam Number: 640-801
Associated Certifications: CCNA
Duration: 90 minutes (55-65 questions)
Available Languages: English, Japanese in Japan only, German in Germany only
Click Here to Register: Pearson VUE
Exam Policies: Read current policies and requirements
Exam Tutorial: Review type of exam questions

Exam Description Exam Topics Recommended Training Additional Resources
Exam Description
The CCNA exam is the qualifying exam available to candidates pursuing a single-exam option for the Cisco Certified Network Associate CCNA certification. The CCNA (640-801) exam will test materials from the new Interconnection Cisco Network Devices (ICND) course as well as the new Introduction to Cisco Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Cisco networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

Exam Topics
The following information provides general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes the guidelines below may change at any time without notice.

Planning & Designing
Design a simple LAN using Cisco Technology
Design an IP addressing scheme to meet design requirements
Select an appropriate routing protocol based on user requirements
Design a simple internetwork using Cisco technology
Develop an access list to meet user specifications
Choose WAN services to meet customer requirements

Implementation & Operation
Configure routing protocols given user requirements
Configure IP addresses, subnet masks, and gateway addresses on routers and hosts
Configure a router for additional administrative functionality
Configure a switch with VLANS and inter-switch communication
Implement a LAN
Customize a switch configuration to meet specified network requirements
Manage system image and device configuration files
Perform an initial configuration on a router
Perform an initial configuration on a switch
Implement access lists
Implement simple WAN protocols

Troubleshooting
Utilize the OSI model as a guide for systematic network troubleshooting
Perform LAN and VLAN troubleshooting
Troubleshoot routing protocols
Troubleshoot IP addressing and host configuration
Troubleshoot a device as part of a working network
Troubleshoot an access list
Perform simple WAN troubleshooting

Technology
Describe network communications using layered models
Describe the Spanning Tree process
Compare and contrast key characteristics of LAN environments
Evaluate the characteristics of routing protocols
Evaluate TCP/IP communication process and its associated protocols
Describe the components of network devices
Evaluate rules for packet control
Evaluate key characteristics of WANs

Free 640-801 Exams’s PDF Download
Free Testking offers free demo for 640-801 PDF(CCNA). You can check out the interface, question quality and usability of our practice exams . We are the only one site can offer demo for almost all CCNA.

Recommended Training about 640-801 exam PDF
The following courses are the recommended training for 640-801 exam PDF.
640-801 Q & A with Explanations
640-801 Audio Exam
640-801 Study Guide
640-801 Preparation Lab

Testking 640-801 CCNA
Interactive Testing Engine Included!
1060 Questions
Updated : 09/18/2008
Price : $87.99 $79.99

Free download?testking 640-801 CCNA
Free download?pass4sure 640-801 CCNA

Related posts:

1. Testking Cisco 640-811 ICND
2. Testking Cisco 640-802 CCNA
3. Testking Cisco ccna 640-822 ICND1

Exam Number: 640-822 ICND1
Associated Certifications: CCENT and CCNA
Duration: 90 Minutes (50-60 questions)
Available Languages: English
Click Here to Register: Pearson VUE
Exam Policies: Read current policies and requirements
Exam Tutorial: Review type of exam questions

Exam Description Exam Topics Recommended Training Additional Resources
Exam Description
The 640-822 Interconnecting Cisco Networking Devices Part 1 (ICND1) is the exam associated with the Cisco Certified Entry Network Technician certification and a tangible first step in achieving the Cisco Certified Network Associate certification. Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices Part 1 (ICND1) v1.0 course. This exam tests a candidate’s knowledge and skills required to successfully install, operate, and troubleshoot a small branch office network. The exam includes topics on networking fundamentals; connecting to a WAN; basic security and wireless concepts; routing and switching fundamentals; the TCP/IP and OSI models; IP addressing; WAN technologies; operating and configuring IOS devices; configuring RIPv2, static and default routing; implementing NAT and DHCP; and configuring simple networks.

Exam Topics
The following topics are general guidelines for the content likely to be included on the Interconnecting Cisco Networking Devices Part 1 exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

Describe the operation of data networks.
Describe the purpose and functions of various network devices
Select the components required to meet a given network specification
Use the OSI and TCP/IP models and their associated protocols to explain how data flows in a network
Describe common networking applications including web applications
Describe the purpose and basic operation of the protocols in the OSI and TCP models
Describe the impact of applications (Voice Over IP and Video Over IP) on a network
Interpret network diagrams
Determine the path between two hosts across a network
Describe the components required for network and Internet communications
Identify and correct common network problems at layers 1, 2, 3 and 7 using a layered model approach
Differentiate between LAN/WAN operation and features

Implement a small switched network
Select the appropriate media, cables, ports, and connectors to connect switches to other network devices and hosts
Explain the technology and media access control method for Ethernet technologies
Explain network segmentation and basic traffic management concepts
Explain the operation of Cisco switches and basic switching concepts
Perform, save and verify initial switch configuration tasks including remote access management
Verify network status and switch operation using basic utilities (including: ping, traceroute,telnet,SSH,arp, ipconfig), SHOW & DEBUG commands
Implement and verify basic security for a switch (port security, deactivate ports)
Identify, prescribe, and resolve common switched network media issues, configuration issues, autonegotiation, and switch hardware failures

Implement an IP addressing scheme and IP services to meet network requirements for a small branch office

Describe the need and role of addressing in a network ” Create and apply an addressing scheme to a network
Assign and verify valid IP addresses to hosts, servers, and networking devices in a LAN environment
Explain the basic uses and operation of NAT in a small network connecting to one ISP
Describe and verify DNS operation
Describe the operation and benefits of using private and public IP addressing
Enable NAT for a small network with a single ISP and connection using SDM and verify operation using CLI and ping
Configure, verify and troubleshoot DHCP and DNS operation on a router.(including: CLI/SDM)
Implement static and dynamic addressing services for hosts in a LAN environment
Identify and correct IP addressing issues

Implement a small routed network
Describe basic routing concepts (including: packet forwarding, router lookup process)
Describe the operation of Cisco routers (including: router bootup process, POST, router components)
Select the appropriate media, cables, ports, and connectors to connect routers to other network devices and hosts
Configure, verify, and troubleshoot RIPv2
Access and utilize the router CLI to set basic parameters
Connect, configure, and verify operation status of a device interface
Verify device configuration and network connectivity using ping, traceroute, telnet, SSH or other utilities
Perform and verify routing configuration tasks for a static or default route given specific routing requirements
Manage IOS configuration files (including: save, edit, upgrade, restore)
Manage Cisco IOS
Implement password and physical security
Verify network status and router operation using basic utilities (including: ping, traceroute,telnet,SSH,arp, ipconfig), SHOW & DEBUG commands

Explain and select the appropriate administrative tasks required for a WLAN
Describe standards associated with wireless media (including: IEEE WI-FI Alliance, ITU/FCC)
Identify and describe the purpose of the components in a small wireless network. (including: SSID, BSS, ESS)
Identify the basic parameters to configure on a wireless network to ensure that devices connect to the correct access point
Compare and contrast wireless security features and capabilities of WPA security (including: open, WEP, WPA-1/2)
Identify common issues with implementing wireless networks

Identify security threats to a network and describe general methods to mitigate those threats
Explain today’s increasing network security threats and the need to implement a comprehensive security policy to mitigate the threats
Explain general methods to mitigate common security threats to network devices, hosts, and applications
Describe the functions of common security appliances and applications
Describe security recommended practices including initial steps to secure network devices

Implement and verify WAN links
Describe different methods for connecting to a WAN
Configure and verify a basic WAN serial connection

Free 640-822 Exams’s PDF Download
Free Testking offers free demo for 640-822 PDF(Interconnecting Cisco Networking Devices Part 1). You can check out the interface, question quality and usability of our practice exams . We are the only one site can offer demo for almost all Interconnecting Cisco Networking Devices Part 1.

Recommended Training about 640-822 exam PDF
The following courses are the recommended training for 640-822 exam PDF.
640-822 Q & A with Explanations
640-822 Audio Exam
640-822 Study Guide
640-822 Preparation Lab

Testking 640-822 ICND1
Interactive Testing Engine Included!
422 Questions
Updated : 09/18/2008
Price : $76.99 $69.99

Free download?testking 640-822 ICND1

Free download?pass4sure 640-822 ICND1

Related posts:

1. Testking Cisco 640-802 CCNA
2. Testking Cisco 640-801 CCNA
3. Testking Cisco 640-816 ICND2

Recommended Training about 640-460 exam PDF
The following courses are the recommended training for 640-460 exam PDF.
640-460 Q & A with Explanations
640-460 Audio Exam
640-460 Study Guide
640-460 Preparation Lab

Testking 640-460 IIUC
Interactive Testing Engine Included!
78 Questions
Updated : 09/18/2008
Price : $87.99 $79.99

Free download?testking 640-460 IIUC

Free download?pass4sure 640-460 IIUC

Related posts:

1. Testking Cisco ccna 640-721 IUWNE
2. Testking Cisco ccna 640-553 IINS
3. Testking Cisco 640-802 CCNA

Recommended Training about 640-553 exam PDF
The following courses are the recommended training for 640-553 exam PDF.
640-553 Q & A with Explanations
640-553 Audio Exam
640-553 Study Guide
640-553 Preparation Lab

Testking 640-553 IINS
Interactive Testing Engine Included!
65 Questions
Updated : 09/18/2008
Price : $87.99 $79.99

Free download?testking 640-553 IINS

Free download?pass4sure 640-553 IINS

Related posts:

1. Testking Cisco ccna voice 640-460 IIUC
2. Testking Cisco ccna 640-721 IUWNE
3. Testking Cisco 640-802 CCNA

Exam Number: 640-802 CCNA
Associated Certifications: CCNA
Duration: 90 Minutes (50-60 questions)
Available Languages: English
Click Here to Register: Pearson VUE
Exam Policies: Read current policies and requirements
Exam Tutorial: Review type of exam questions

Exam Description Exam Topics Recommended Training Additional Resources
Exam Description
The 640-802 Cisco Certified Network Associate (CCNA) is the composite exam associated with the Cisco Certified Network Associate certification. Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices Part 1 (ICND1) v1.0 and the Interconnecting Cisco Networking Devices Part 2 (ICND2) v1.0 courses. This exam tests a candidate’s knowledge and skills required to install, operate, and troubleshoot a small to medium size enterprise branch network. The topics include connecting to a WAN; implementing network security; network types; network media; routing and switching fundamentals; the TCP/IP and OSI models; IP addressing; WAN technologies; operating and configuring IOS devices; extending switched networks with VLANs; determining IP routes; managing IP traffic with access lists; establishing point-to-point connections; and establishing Frame Relay connections.

Exam Topics
The following topics are general guidelines for the content likely to be included on the Cisco Certified Network Associate exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

Describe how a network works
Describe the purpose and functions of various network devices
Select the components required to meet a network specification
Use the OSI and TCP/IP models and their associated protocols to explain how data flows in a network
Describe common networked applications including web applications
Describe the purpose and basic operation of the protocols in the OSI and TCP models
Describe the impact of applications (Voice Over IP and Video Over IP) on a network
Interpret network diagrams
Determine the path between two hosts across a network
Describe the components required for network and Internet communications
Identify and correct common network problems at layers 1, 2, 3 and 7 using a layered model approach
Differentiate between LAN/WAN operation and features

Configure, verify and troubleshoot a switch with VLANs and interswitch communications
Select the appropriate media, cables, ports, and connectors to connect switches to other network devices and hosts
Explain the technology and media access control method for Ethernet networks
Explain network segmentation and basic traffic management concepts
Explain basic switching concepts and the operation of Cisco switches
Perform and verify initial switch configuration tasks including remote access management
Verify network status and switch operation using basic utilities (including: ping, traceroute, telnet, SSH, arp, ipconfig), SHOW & DEBUG commands
Identify, prescribe, and resolve common switched network media issues, configuration issues, auto negotiation, and switch hardware failures
Describe enhanced switching technologies (including: VTP, RSTP, VLAN, PVSTP, 802.1q)
Describe how VLANs create logically separate networks and the need for routing between them
Configure, verify, and troubleshoot VLANs
Configure, verify, and troubleshoot trunking on Cisco switches
Configure, verify, and troubleshoot interVLAN routing
Configure, verify, and troubleshoot VTP
Configure, verify, and troubleshoot RSTP operation
Interpret the output of various show and debug commands to verify the operational status of a Cisco switched network.
Implement basic switch security (including: port security, trunk access, management vlan other than vlan1, etc.)

Implement an IP addressing scheme and IP Services to meet network requirements in a medium-size Enterprise branch office network.
Describe the operation and benefits of using private and public IP addressing
Explain the operation and benefits of using DHCP and DNS
Configure, verify and troubleshoot DHCP and DNS operation on a router.(including: CLI/SDM)
Implement static and dynamic addressing services for hosts in a LAN environment
Calculate and apply an addressing scheme including VLSM IP addressing design to a network
Determine the appropriate classless addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment
Describe the technological requirements for running IPv6 in conjunction with IPv4 (including: protocols, dual stack, tunneling, etc).
Describe IPv6 addresses
Identify and correct common problems associated with IP addressing and host configurations

Configure, verify, and troubleshoot basic router operation and routing on Cisco devices
Describe basic routing concepts (including: packet forwarding, router lookup process)
Describe the operation of Cisco routers (including: router bootup process, POST, router components)
Select the appropriate media, cables, ports, and connectors to connect routers to other network devices and hosts
Configure, verify, and troubleshoot RIPv2
Access and utilize the router to set basic parameters.(including: CLI/SDM)
Connect, configure, and verify operation status of a device interface
Verify device configuration and network connectivity using ping, traceroute, telnet, SSH or other utilities
Perform and verify routing configuration tasks for a static or default route given specific routing requirements
Manage IOS configuration files. (including: save, edit, upgrade, restore)
Manage Cisco IOS.
Compare and contrast methods of routing and routing protocols
Configure, verify, and troubleshoot OSPF
Configure, verify, and troubleshoot EIGRP
Verify network connectivity (including: using ping, traceroute, and telnet or SSH)
Troubleshoot routing issues
Verify router hardware and software operation using SHOW & DEBUG commands.
Implement basic router security

Explain and select the appropriate administrative tasks required for a WLAN
Describe standards associated with wireless media (including: IEEE WI-FI Alliance, ITU/FCC)
Identify and describe the purpose of the components in a small wireless network. (Including: SSID, BSS, ESS)
Identify the basic parameters to configure on a wireless network to ensure that devices connect to the correct access point
Compare and contrast wireless security features and capabilities of WPA security (including: open, WEP, WPA-1/2)
Identify common issues with implementing wireless networks. (Including: Interface, missconfiguration)

Identify security threats to a network and describe general methods to mitigate those threats
Describe today’s increasing network security threats and explain the need to implement a comprehensive security policy to mitigate the threats
Explain general methods to mitigate common security threats to network devices, hosts, and applications
Describe the functions of common security appliances and applications
Describe security recommended practices including initial steps to secure network devices

Implement, verify, and troubleshoot NAT and ACLs in a medium-size Enterprise branch office network.
Describe the purpose and types of ACLs
Configure and apply ACLs based on network filtering requirements.(including: CLI/SDM)
Configure and apply an ACLs to limit telnet and SSH access to the router using (including: SDM/CLI)
Verify and monitor ACLs in a network environment
Troubleshoot ACL issues
Explain the basic operation of NAT
Configure NAT for given network requirements using (including: CLI/SDM)
Troubleshoot NAT issues

Implement and verify WAN links
Describe different methods for connecting to a WAN
Configure and verify a basic WAN serial connection
Configure and verify Frame Relay on Cisco routers
Troubleshoot WAN implementation issues
Describe VPN technology (including: importance, benefits, role, impact, components)
Configure and verify a PPP connection between Cisco routers

Free 640-802 Exams’s PDF Download
Free Testking offers free demo for 640-802 PDF(Cisco Certified Network Associate). You can check out the interface, question quality and usability of our practice exams . We are the only one site can offer demo for almost all Cisco Certified Network Associate.

Recommended Training about 640-802 exam PDF
The following courses are the recommended training for 640-802 exam PDF.
640-802 Q & A with Explanations
640-802 Audio Exam
640-802 Study Guide
640-802 Preparation Lab

Testking 640-802 CCNA
Interactive Testing Engine Included!
806 Questions
Updated : 09/18/2008
Price : $87.99 $79.99

Free download?testking 640-802 CCNA

Free download?pass4sure 640-802 CCNA

Related posts:

1. Testking Cisco ccna 640-822 ICND1
2. Testking Cisco 640-801 CCNA
3. Testking Cisco 640-816 ICND2

Exam Number: 640-816 ICND2
Associated Certifications: CCNA
Duration: 75 minutes (45-55 questions)
Available Languages: English
Click Here to Register: Pearson VUE
Exam Policies: Read current policies and requirements
Exam Tutorial: Review type of exam questions

Exam Description Exam Topics Recommended Training Additional Resources
Exam Description
The 640-816 Interconnecting Cisco Networking Devices Part 2 (ICND2) is the exam associated with the Cisco Certified Network Associate certification. Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices Part 2 (ICND2) v1.0 course. This exam tests a candidate’s knowledge and skills required to successfully install, operate, and troubleshoot a small to medium size enterprise branch network. The exam covers topics on VLSM and IPv6 addressing; extending switched networks with VLANs; configuring, verifying and troubleshooting VLANs; the VTP, RSTP, OSPF and EIGRP protocols; determining IP routes; managing IP traffic with access lists; NAT and DHCP; establishing point-to- point connections; and establishing Frame Relay connections.

Exam Topics
The following topics are general guidelines for the content likely to be included on the Interconnecting Cisco Networking Devices Part 2 exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

Configure, verify and troubleshoot a switch with VLANs and interswitch communications
Describe enhanced switching technologies (including: VTP, RSTP, VLAN, PVSTP, 802.1q)
Describe how VLANs create logically separate networks and the need for routing between them
Configure, verify, and troubleshoot VLANs
Configure, verify, and troubleshoot trunking on Cisco switches
Configure, verify, and troubleshoot interVLAN routing
Configure, verify, and troubleshoot VTP
Configure, verify, and troubleshoot RSTP operation
Interpret the output of various show and debug commands to verify the operational status of a Cisco switched network
Implement basic switch security (including: port security, unassigned ports, trunk access, etc.)
Implement an IP addressing scheme and IP Services to meet network requirements in a medium-size Enterprise branch office network
Calculate and apply a VLSM IP addressing design to a network
Determine the appropriate classless addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment
Describe the technological requirements for running IPv6 (including: protocols, dual stack, tunneling, etc)
Describe IPv6 addresses
Identify and correct common problems associated with IP addressing and host configurations
Configure and troubleshoot basic operation and routing on Cisco devices
Compare and contrast methods of routing and routing protocols
Configure, verify and troubleshoot OSPF
Configure, verify and troubleshoot EIGRP
Verify configuration and connectivity using ping, traceroute, and telnet or SSH
Troubleshoot routing implementation issues
Verify router hardware and software operation using SHOW & DEBUG commands
Implement basic router security
Implement, verify, and troubleshoot NAT and ACLs in a medium-size Enterprise branch office network.
Describe the purpose and types of access control lists
Configure and apply access control lists based on network filtering requirements
Configure and apply an access control list to limit telnet and SSH access to the router
Verify and monitor ACL’s in a network environment
Troubleshoot ACL implementation issues
Explain the basic operation of NAT
Configure Network Address Translation for given network requirements using CLI
Troubleshoot NAT implementation issues
Implement and verify WAN links
Configure and verify Frame Relay on Cisco routers
Troubleshoot WAN implementation issues
Describe VPN technology (including: importance, benefits, role, impact, components)
Configure and vary PPP connection between Cisco routers

Free 640-816 Exams’s PDF Download
Free Testking offers free demo for 640-816 PDF(Interconnecting Cisco Networking Devices Part 2). You can check out the interface, question quality and usability of our practice exams . We are the only one site can offer demo for almost all Interconnecting Cisco Networking Devices Part 2.

Recommended Training about 640-816 exam PDF
The following courses are the recommended training for 640-816 exam PDF.
640-816 Q & A with Explanations
640-816 Audio Exam
640-816 Study Guide
640-816 Preparation Lab

testking 640-816 ICND2
Interactive Testing Engine Included!
469 Questions
Updated : 09/18/2008
Price : $76.99 $69.99

Free download?testking 640-816 ICND2

Free download?pass4sure 640-816 ICND2

Related posts:

1. Testking Cisco 640-811 ICND
2. Testking Cisco ccna 640-822 ICND1
3. Testking Cisco 640-802 CCNA